Five signs of brake failure

The brake system is an important unit of the car, the failure of the brake system will directly threaten the safety of the vehicle and the life of the personnel. In the daily driving process, if you encounter the following kinds of brake problems, you need to pay more attention!

1. Abnormal brake noise

This sound is mainly the brake pad and brake disc friction sound. Many owners will find that there will be a significant noise when they step on the brakes after just washing the car or just raining. This is due to the brake disc after the use of heat, cold contraction, resulting in a normal phenomenon.

However, if the brake abnormal noise has been present, it may be that the brake pads are thinning, the backplane is grinding the brake disc, and the brake pads are hardening. Therefore, when this phenomenon occurs, we must first check the thickness of the brake pads to avoid safety accidents.

2. Braking deviation

This phenomenon is more serious. The phenomenon of brake deviation is that the steering wheel has an obvious deflection to one side when the owner steps on the brake. The main reason for this is that the brake pads are worn off or the brake pump has a problem. Especially at high speed, it is extremely dangerous, so once this phenomenon occurs, you need to go to the repair shop immediately.

ceramic brake pad

3. Brake hardening

This phenomenon is relatively common. The current automotive brake power system is mostly vacuum power. When the vacuum booster fails or frequent braking causes the brake to have no power, it is like a brick. This kind of problem is not big or small, it is not easy to go to the maintenance station to check.

4. The brake pedal travel is longer

The brake pedal travel is longer simply said that before stepping on a foot to brake, the travel needs to step on the end to work after the change. The main reason may be the entry of air into the brake system, the lack of brake oil, the existence of leakage, and the serious wear of the brake pads. This phenomenon needs to be checked in time at the maintenance factory.

5. Rebound when you hit the brakes

This occurs when the brake pedal is pressed and the top foot rebounds. Most of the reasons for the brake disc, brake pad surface uneven, steel ring deformation. It is recommended to check the brake disc surface first, in addition, the brake oil is replaced every two years, which helps to maintain the brake system function.

The above are common signs of brake failure. If the above problems occur, you need to drive your car to the garage to check and check, if necessary, it is best to replace the good quality brake pads to reduce the risk of hidden dangers.

brake pad manufacturer

You Might Also Like

Send Inquiry