Complete Guide to Brake Pad Selection and Usage: From Materials to Maintenance, Safeguarding Core Driving Safety

As the "core friction component" of a vehicle's braking system, brake pads directly determine braking distance and driving safety. However, most car owners have cognitive blind spots in material selection, replacement timing, and fault diagnosis. With years of experience in the brake pad industry, Shandong Huaruifeng Machinery Co., Ltd. combines industry standards and practical expertise to sort out comprehensive professional knowledge from selection to maintenance, helping you avoid pitfalls and travel safely.

I. Materials Determine Performance: Analysis of Five Mainstream Materials and Adaptable Scenarios

The material formula of brake pads is the core of their performance. Different materials vary significantly in high-temperature resistance, wear resistance, noise control, and other aspects, requiring scientific selection based on vehicle type and driving scenarios:

1. Ceramic Brake Pads: The mainstream choice for family cars currently, with ceramic fibers as the core base material supplemented by non-metallic mineral formulas. They can withstand temperatures above 650℃, have a stable friction coefficient (0.35-0.45), produce less brake dust, low noise, and a service life of generally 50,000-100,000 kilometers. Shandong Huaruifeng's ceramic matrix composite brake pads developed for mid-to-high-end family cars and new energy vehicles further optimize the low drag torque design to adapt to regenerative braking systems. Their wear rate is 40% lower than traditional ceramic pads, making them the preferred supporting product for automobile manufacturers such as BYD and Geely.

2. Semi-Metallic Brake Pads: Containing 30%-65% metal fibers, they excel in high-temperature resistance (thermal fade temperature above 400℃) and braking stability, suitable for scenarios requiring frequent braking such as ride-hailing cars and commercial vehicles. However, they are prone to abnormal noise at low temperatures and cause relatively more wear to brake discs, requiring regular inspection of disc thickness. By optimizing the metal fiber ratio and heat treatment process, Shandong Huaruifeng has reduced the abnormal noise rate of its products to 1/3 of the industry average, making them a cost-effective choice in the commercial vehicle after-sales market.

3. Low-Metallic Brake Pads: With metal content below 30%, they balance braking efficiency and comfort, causing little wear to brake discs and excellent noise control, suitable for daily use of urban commuter cars. Their shortcoming is that the friction coefficient degrades significantly in high-temperature environments, so it is necessary to pay attention to changes in braking distance during continuous downhill driving or frequent high-speed braking.

4. Non-Metallic Brake Pads: Pressed from pure organic fibers and resins, completely free of metal components, they produce extremely low braking noise and no wear to brake discs, suitable for micro electric vehicles used for short-distance travel at low speeds. However, their high-temperature resistance is poor (thermal fade temperature below 300℃) and friction coefficient is low, so they are strictly prohibited for high-speed or heavy-load working conditions, otherwise, there will be potential safety hazards.

5. Carbon-Ceramic Brake Pads: Made of carbon fiber and ceramic composite technology, they can withstand temperatures above 800℃ and weigh only 1/3 of traditional metal pads, which can significantly improve braking response speed. They are only suitable for high-performance sports cars or professional racing scenarios. Their core shortcoming is the extremely high replacement cost, and they need to be matched with special carbon-ceramic brake discs, resulting in low cost-effectiveness for daily commuting.

.png

II. Avoid Pitfalls in Selection: Three Core Standards + Shandong Huaruifeng's Quality Assurance

High-quality brake pads must meet the three requirements of "adaptability, compliance, and stability" simultaneously. You can accurately judge from the following dimensions when purchasing:

1. Parameter Matching is the Premise: First, confirm that the model and specification of the brake pads are consistent with the original vehicle. Provide "vehicle year + displacement + drive mode" or refer to the original brake pad model to ensure complete adaptation to the brake caliper type and brake disc size with precise hole positions. Secondly, pay attention to the friction coefficient: choose 0.35-0.45 (Class GG/FF) for family cars, and 0.40-0.50 (Class HH) for SUVs/MPVs. Avoid blindly pursuing high friction coefficients (such as Class JJ) or choosing products with excessively low coefficients (Class EE). Shandong Huaruifeng provides a vehicle adaptation query system for its entire product line, and the friction coefficient fluctuation rate of core products is controlled within ±5%, far exceeding the requirements of the national standard GB 5763-2018.

2. Compliance Cannot Be Ignored: According to the national mandatory standard GB 5763-2018, brake pads must clearly mark the manufacturer's name, trademark, and friction coefficient information, and the content of harmful components must meet the limit requirements. GB/T 39875-2024 implemented in 2025 further tightens the limits on copper content and VOCs emissions, and traditional high-copper products are facing elimination. The copper content of Shandong Huaruifeng's core products is controlled below 3%, and they have passed the CCC certification and EU ELV directive compliance audit. The material traceability system covers the entire production process, allowing car owners to use them with confidence.

3. Quality Identification Skills: High-quality brake pads have regular workmanship, with friction materials firmly bonded to the metal backplate, no bubbles or cracks, and no rust or burrs on the backplate; they have no pungent odor after heating, only emitting a slight odor of the material itself. Shandong Huaruifeng adopts ultrasonic composite processing technology and automated pressing production lines. All products undergo three rounds of factory inspections including friction coefficient testing, hardness testing, and precision inspection of appearance and size. Unqualified products are not allowed to enter the market, and a 1-2 year warranty service is provided to solve after-sales worries.

III. Replacement Timing: Three Signals + Scientific Cycle, Don't Wait Until It Grinds to the Iron Plate

Brake pads should not be replaced "only when they can no longer be used". Replace them immediately when the following signals appear to avoid reduced braking performance:

1. Abnormal Noise Warning: Sharp metal friction sounds such as "squeaking" or "chirping" during braking are alarm signals that the wear warning plate inside the brake pad is in contact with the brake disc. At this time, the thickness of the friction material is only 3-5mm. Continuing to use it will scratch the brake disc, doubling the maintenance cost. If there is a "dull thud" or "thumping sound", it may be due to improper installation or brake disc deformation, which needs to be checked in time.

2. Performance Degradation: A soft brake pedal, longer stroke, or significantly increased braking distance with the same force is likely due to excessive wear of the brake pads and thinning of the friction material leading to failure of pressure transmission. Experts from Shandong Huaruifeng remind that due to the characteristics of the regenerative braking system, the wear of brake pads in new energy vehicles is relatively slow, but regular inspections are still necessary to avoid material aging caused by long-term light wear.

3. Cycle and Thickness Standards: The service life of brake pads for ordinary family cars is about 20,000-30,000 kilometers (it can be shortened to 15,000-20,000 kilometers for frequent braking in urban commuting), and it can be extended to 30,000-40,000 kilometers for frequent highway driving, but it should not exceed 40,000 kilometers at most. Judging from thickness: the thickness of new pads is 10-12mm, and they must be replaced when worn down to below 3mm (about half the thickness of a coin). They need to be closely monitored when worn down to 1/3. It is recommended to check the condition of the brake pads every 5,000 kilometers driven.

IV. Common Fault Diagnosis: Quick Response to Six Major Problems

Various faults may occur during the use of brake pads. Timely diagnosis can avoid safety risks:

1. Brake Abnormal Noise: In addition to wear warnings, it may also be caused by poor quality brake pads, foreign matter inclusion, or brake disc rust. You can first clean the foreign matter, and if the abnormal noise persists, replace with high-quality brake pads.

2. Brake Pull: Mostly caused by uneven force of the brake caliper or uneven wear of the brake pads. It is necessary to check the caliper and brake pipeline, and re-install and calibrate the brake pads if necessary.

3. Soft Brake Pedal: A common reason is insufficient/deteriorated brake fluid or air in the brake pipeline. It is necessary to replenish or replace the brake fluid in a timely manner and bleed the air in the pipeline.

4. Pedal Rebound: It may be due to ABS system activation, uneven surface of the brake disc/brake pad, or rim deformation. It is necessary to check the flatness of the brake disc and perform disc skimming if necessary.

5. Brake Not Returning: Mostly caused by dirty and stuck caliper pistons. It is necessary to clean the pistons and bleed the air in the brake pipeline.

6. Brake Failure: An extreme situation, mostly related to product quality or system failure. When it occurs, it is necessary to control the direction, decelerate using engine braking, and use the handbrake for assistance when the speed is below 60KM/H.

Conclusion: Choose a Professional Brand to Safeguard Travel Safety

As a "life-saving component", the quality and adaptability of brake pads are directly related to driving safety. Do not choose "three-no products" to save money. Shandong Huaruifeng Machinery Co., Ltd. has always taken "compliance first, technology empowerment" as the core. Relying on the whole-process environmental protection production line, customized product system, and strict quality control, it provides high-performance brake pad solutions for different vehicle types and driving scenarios. From material R&D to after-sales service, every link reflects professional strength, allowing car owners to feel safe and reliable in every braking.

image-20251231152528-2.png

You Might Also Like

Send Inquiry