Material Revolution And Intelligent Upgrade Resonate: The Automotive Brake Pad Industry Enters A New Era Of Environmental Protection And Safety
Every friction between the brake pedal and the wheels is crucial to safety and the environment, and the automotive brake pad industry is now experiencing a boom in technological iteration. From the breakthrough in new environmentally friendly materials by the Indian Institute of Technology, to the launch of Brembo's intelligent brake kits at the Shanghai Auto Show, and the safety discussions triggered by Xiaomi's test incident, multiple signals indicate that brake pads with both environmental performance and intelligent adaptability have become the core focus of market competition, driving the industry toward a comprehensive transformation featuring "low pollution, high safety, and long service life."
I. Material Innovation: "Resin Replacement Solution" for the Copper-Free Era Addresses Industry Pain Points
The long-standing challenge of balancing environmental protection and performance in traditional brake pads is being solved by new material technologies. In August 2025, a joint international study published in the journal Composites Part B: Engineering showed that thermosetting polyaryletherketone (R-PAEK) composite materials, developed by institutions including the Indian Institute of Technology and Politecnico di Torino, provide a revolutionary solution for copper-free brake pads.
"This is equivalent to equipping brake pads with an 'environmental protection core'," noted Mark White, a professor at the University of Tennessee and a core member of the research team. When traditional phenolic resin is used as a binder in brake pads, it has inherent defects such as short storage life, release of harmful volatile substances during processing, and performance degradation at high temperatures. In contrast, R-PAEK resin not only enables indefinite storage and non-toxic recyclability but also achieves performance breakthroughs: Copper-free brake pads containing 4%-6% R-PAEK by weight demonstrated excellent friction stability in dynamometer tests, with brake noise and vibration (NV) levels reduced by 40% compared to traditional products. Even under high-speed braking conditions at 100 km/h, the friction coefficient remains stable in the optimal range of 0.45-0.55, fully meeting international safety standards.
This breakthrough comes at a critical juncture of tightening environmental regulations. As the EU 7 emission standards are set to take effect in 2026, brake dust reduction has become a mandatory requirement, and the industrial application of R-PAEK materials is entering the countdown phase. Gardia Chemical Co., Ltd. revealed that it has completed the construction of an R-PAEK resin production line with an annual output of 500 tons, and supporting brake pad products are expected to enter the after-sales markets in China and Europe in 2026.

II. Layout by International Giants: "Dual-Drive" Strategy of Intelligence + Environmental Protection
While material innovation is advancing, leading international enterprises are seizing market opportunities through a combined strategy of "intelligent hardware + environmentally friendly materials." At the 2025 Shanghai Auto Show, Brembo's Greentell brake kit attracted industry attention. This solution, integrating "green" and "intelligent" features, adopts double-layer nickel-free coating and laser metal deposition technology, achieving a 90% reduction in brake dust and an 80% reduction in brake disc wear, thus meeting the EU 7 regulatory requirements in advance.
Even more noteworthy is the SENSIFY® intelligent brake system, co-developed by Brembo and Michelin. Through the collaboration of built-in sensors in brake pads and connected software, the system can real-time monitor the wear status of friction materials and road surface adhesion, and dynamically adjust braking force distribution. Preliminary tests show that under rainy and slippery road conditions or with worn tires, the system can shorten the braking distance by up to 4 meters, equivalent to providing drivers with a valuable 1.2 seconds of reaction time during high-speed driving. "Intelligent technology has transformed brake pads from 'passive wear parts' to 'active safety units'," said Zhang Tao, President of Brembo China. The system has been adapted to new energy vehicle models such as the BMW iX and Tesla Model 3, with expected installation volume exceeding 100,000 sets in 2025.
Lightweight design has also become a key focus of technological competition. Brembo's new modular four-piston caliper, developed through topology optimization technology, weighs only 4.3-5.1 kg. Combined with ENESYS energy-saving spring technology to eliminate residual torque, it can save up to 150 kWh of electricity per vehicle annually, perfectly adapting to the dual needs of new energy vehicles for extended range and weight reduction.
III. Market Expansion and Structural Upgrade: Differentiation and Opportunities in the 50 Billion Yuan Track
Technological breakthroughs are driving continuous market expansion. According to industry forecasts, the scale of China's brake pad market will approach 40 billion yuan in 2025 and is expected to exceed 50 billion yuan by 2030, with a compound annual growth rate of approximately 6%. This growth is driven by two key factors: on one hand, the huge stock of 330 million vehicles in China supports the demand for the after-sales market, with the annual replacement rate per vehicle increasing from 1.2 times in 2025 to 1.5 times in 2030; on the other hand, the transition to new energy vehicles has spawned new demands, as their regenerative braking and special braking needs after battery degradation are driving the rapid growth of the high-performance brake pad market.
The market structure is showing obvious differentiation: the scale of the environmentally friendly brake pad market will grow from 12 billion yuan in 2025 to 25 billion yuan in 2030, and the market share of lightweight brake pads is expected to exceed 40%; in contrast, the share of mid-to-low-end asbestos substitute products is continuously shrinking at an annual rate of 8%. Geographically, the eastern coastal regions remain the main market (accounting for 62% in 2025), while the central and western regions have achieved a growth rate of 12%, emerging as new growth engines.
The competitive landscape is also being reshaped. In 2025, the top five enterprises in the industry will account for 45% of the market share. International brands such as Brembo and Bosch dominate the high-end supporting market, while local enterprises such as Wanxiang Qianchao and Gold 麒麟 (Golden Kylin) are seizing the after-sales market with cost-effective advantages, with their ceramic brake pad exports accounting for 18% of the global market. "The technological gap is narrowing rapidly, and local enterprises have achieved breakthroughs in brake pads for new energy commercial vehicles," pointed out Wang Jianjun, Secretary-General of the China Friction and Sealing Materials Association.

IV. Safety Alert: Controversies Over "Usage Boundaries" in the High-Performance Era
While the industry is developing rapidly, safety hazards and cognitive misunderstandings cannot be ignored. In June 2025, a brake pad fire occurred during the track test of Xiaomi's YU7 Max model in Tianjin, triggering discussions on the "balance between performance and safety" in the market. The investigation into the incident showed that the test vehicle did not activate the enhanced energy recovery mode and failed to perform the "heat dissipation lap" procedure, leading to resin cracking and ignition of the low-metallic brake pads at a high temperature of 600°C.
"This exposes the cognitive bias of consumers and automakers regarding 'high-performance brake pads'," said Li Mingliang, an automotive safety expert. Low-metallic brake pads for ordinary civilian vehicles are designed to withstand temperatures of 300-400°C, while intense track driving can easily cause temperatures to exceed 600°C, requiring dedicated carbon-ceramic brake pads. Recent random inspections by market supervision authorities show that the qualification rate of online-purchased brake pads is only 68%, and some products have a friction coefficient of less than 0.3, far below the minimum national standard of 0.35, leading to an increase in braking distance of more than 10 meters at high temperatures.
In this regard, industry experts remind consumers to avoid three major misunderstandings: first, blindly trusting "universal models" – the pressure of brake calipers varies greatly among different vehicle models, and mismatching may lead to brake failure; second, ignoring the wear limit – brake pads should be replaced immediately when their thickness is less than 3 mm; third, confusing "quiet operation" with "safety" – some products excessively pursue quietness at the expense of friction performance. "Choosing brands with original equipment manufacturer (OEM) supporting qualifications, such as Bosch and Wanxiang, is the foundation of safety assurance," emphasized Li Mingliang.
From the all-electric drive revolution in rail transit to material upgrades in the automotive sector, every breakthrough in braking technology is redefining the boundaries of safety and environmental protection. With the industrialization of new materials such as R-PAEK and the popularization of intelligent brake systems, brake pads are evolving from simple friction components to core units integrating safety assurance, environmental protection and emission reduction, and intelligent sensing, laying a solid foundation for future mobility safety.






