Ceramic Brake Pads Manufacturer for Wholesale & OEM Supply
Ceramic Brake Pads for Global Automotive Aftermarket
Ceramic Brake Pads are developed for passenger cars and selected commercial vehicle applications where controlled braking performance, low-noise characteristics, reduced visible dust, balanced wear, and consistent production quality are important.
Our ceramic brake pads are supplied for automotive aftermarket wholesalers, importers, distributors, repair networks, fleet suppliers, and private-label buyers. Product development is supported by friction formulation expertise, application-based engineering, controlled manufacturing processes, and quality inspection for repeat production.
The manufacturing facility was established in 2011 and covers approximately 200,000 m², with more than 600 employees, 65 senior engineers, five production lines, and annual production capacity of approximately 6 million sets. The product program includes more than 1,200 models, including applications covering more than 100 new energy vehicle models.
For wholesale customers, these resources support regular aftermarket supply, broader product catalogs, OEM development, and private-label programs.
Why Choose Ceramic Brake Pads?
Controlled Friction Performance
Brake pad quality cannot be judged by friction coefficient alone. The friction material must work appropriately with the specified brake disc, caliper system, vehicle characteristics, temperature conditions, and intended application.
Our engineering team has independent friction formulation development capability. Formulations can therefore be evaluated according to the vehicle application and required performance rather than applying one generic ceramic compound to every product.
For distributors, this application-based approach provides greater flexibility when developing brake pad ranges for different vehicle segments and target markets.
Low-Noise Characteristics
Ceramic friction materials are commonly selected for applications where controlled brake noise is an important consideration.
Brake noise can also be influenced by pad geometry, backing plate construction, brake disc condition, caliper design, installation, temperature, and vehicle characteristics. Therefore, noise performance should be evaluated as part of the complete brake system rather than attributed to the friction material alone.
Controlled Dust
Lower visible brake dust is another reason ceramic formulations are selected, particularly for passenger vehicles where wheel cleanliness can influence customer satisfaction.
Actual dust generation depends on the formulation, brake disc, vehicle system, driving conditions, and operating environment. For this reason, product performance should be assessed against the specific application and applicable test method.
Balanced Pad and Disc Interaction
A brake pad and brake disc operate as a system. An overly aggressive formulation may contribute to unnecessary disc wear, while an unsuitable friction material can affect braking consistency.
Product development therefore considers the relationship between friction material, backing plate, brake disc, vehicle application, and operating requirements.
Technical Specifications
|
Item |
Specification |
|
Product Type |
Ceramic Disc Brake Pads |
|
Main Applications |
Passenger Cars; Selected Commercial Vehicles |
|
Friction Material |
Ceramic-based friction formulation |
|
Product Coverage |
1,200+ product models |
|
New Energy Vehicle Coverage |
100+ vehicle models |
|
Formulation Development |
Application-specific |
|
Friction Coefficient |
Confirmed according to formulation and test method |
|
Temperature Performance |
Application-specific |
|
Wear Characteristics |
Evaluated according to product application |
|
Noise Performance |
Formulation and brake-system dependent |
|
Dust Characteristics |
Formulation and operating-condition dependent |
|
Pad Dimensions |
According to OE/reference and application |
|
Backing Plate |
Application-specific |
|
Testing |
Product-specific testing according to requirements |
|
OEM / ODM |
Available |
|
Private Label |
Available |
|
Production Lines |
5 |
|
Annual Capacity |
6 million sets |
Technical note: Exact values for friction coefficient, operating temperature, compressibility, shear strength, wear rate, and noise performance should be confirmed for the specific part number and applicable test method. Generic values should not be applied to different formulations or vehicle applications.
For wholesale buyers, production capacity is directly related to supply continuity. A supplier must be able to maintain production when order quantities increase or when multiple vehicle applications need to be supplied simultaneously.
Our manufacturing resources include:
• Established in 2011
• Approximately 200,000 m² facility
• 600+ employees
• 65 senior engineers
• 5 production lines
• Approximately 6 million sets/year capacity
• 1,200+ product models
These manufacturing figures should be supported on the website by genuine factory photographs, production-line images, testing equipment, warehouse facilities, and other verifiable company information.
For B2B supplier evaluation, buyers can review available manufacturing and quality documentation as part of the qualification process.
Quality Control & Batch Consistency
For aftermarket wholesalers and distributors, consistent quality between production batches is critical. Variations in friction characteristics, dimensions, surface condition, or construction can lead to customer complaints, returns, and additional inventory costs. Quality control covers the main manufacturing stages:
Raw Material Control
Materials and formulation components are controlled according to the specified product requirements.
Mixing and Formulation Control
Controlled preparation helps maintain the intended characteristics of the friction material.
Forming and Curing
Production parameters are controlled during forming and curing to maintain product consistency.
Dimensional & Appearance Inspection
Finished pads are checked for dimensions, surface condition, construction, and appearance.
Performance Evaluation
Where applicable, friction-related and mechanical performance is evaluated according to the specific product requirements and test methods.
Final Inspection & Traceability
Finished products are inspected before shipment, with relevant production information maintained for quality management and traceability.
The objective is to control variation throughout production rather than relying only on final visual inspection.
Testing, Certification & Documentation
Brake pads are safety-related automotive components, so testing and certification should always correspond to the specific product, part number, test method, and destination market.
For applicable replacement brake lining assemblies and related products, UN Regulation No. 90 establishes relevant approval and testing requirements. Where applicable to a specific product program, buyers can request relevant technical specifications, test records, approval documents, and supplier qualification materials for review.
Certification should not automatically be assumed for every ceramic brake pad in the product category. The exact product and destination-market requirements should be confirmed before commercial use.
Where available and applicable, supplier evaluation can include:
• Product specifications
• Test reports
• Inspection records
• Certification documents
• Production information
• Packaging specifications
• Quality documentation
This documentation helps purchasing teams evaluate the product and supplier before placing repeat orders.
A broad model range helps wholesalers build a more complete aftermarket catalog and reduce dependence on multiple suppliers.
The current product program includes more than 1,200 models, covering passenger cars, selected commercial vehicles, and more than 100 new energy vehicle applications.
For accurate fitment, buyers should provide:
• OE or reference number
• Vehicle make and model
• Model year
• Brake system
• Pad dimensions
• Backing plate configuration
• Vehicle application
• Target market
• Required standard or certification
Samples, drawings, photographs, and existing product specifications can also be provided when additional engineering verification is required.
OEM, ODM & Private Label
OEM Supply
Products can be supplied according to specified OE references, dimensions, vehicle applications, friction requirements, and technical specifications.
ODM Development
Customers requiring application-specific products can provide samples, drawings, existing products, target performance requirements, or vehicle information for engineering evaluation and friction formulation development.
Private Label
Private-label programs can include product identification, packaging, labels, markings, and related documentation according to customer requirements.
This allows distributors and importers to develop their own brake pad product ranges while working with an established manufacturing partner.
Wholesale Purchasing Information
|
Buyer Requirement |
Support |
|
Product Selection |
OE number, application, sample, or drawing evaluation |
|
MOQ |
Confirmed according to model and order program |
|
Sample |
Available for qualified evaluation |
|
OEM |
Available |
|
ODM |
Available |
|
Private Label |
Available |
|
Packaging |
Standard or customer-specified |
|
Technical Documents |
Available according to product |
|
Test Documents |
Available according to applicable product |
|
Production Capacity |
Approx. 6 million sets/year |
|
Lead Time |
Confirmed according to model, quantity, and production schedule |
MOQ and lead time should be confirmed for each project because model mix, quantity, packaging requirements, and production planning can affect the final schedule.
How to Start a Wholesale Order
Send Product Requirements
Provide OE numbers, vehicle applications, samples, drawings, or existing specifications.
Technical Evaluation
The application, dimensions, construction, and applicable requirements are reviewed.
Specification Confirmation
Product specifications, testing requirements, packaging, and labeling are confirmed.
Sample Evaluation
Samples can be supplied and evaluated when required before mass production.
Mass Production
Production is scheduled according to the confirmed specifications and order quantity.
Final Inspection & Shipment
Finished products are inspected and prepared according to the agreed packaging and shipping requirements.
FAQ
Request a Ceramic Brake Pad Quote
Whether you are expanding an aftermarket brake parts catalog, developing a private-label range, or sourcing ceramic brake pads for specific vehicle applications, product selection should begin with the actual application, technical requirements, and target market.
Send your OE numbers, product list, samples, drawings, vehicle applications, or purchasing requirements for technical evaluation.
Request Technical Evaluation & Wholesale Pricing
We're well-known as one of the leading ceramic brake pads manufacturers and suppliers in China. If you're going to wholesale discount ceramic brake pads for sale, welcome to get quotation from our factory. Good service and quality products are available.
