Basic Composition of Brake Pads: Understand the Three Core Components in 3 Minutes
Brake pads are the "safety cornerstone" of a car's braking system, and their performance is jointly determined by three internal core components. Whether for daily vehicle use or selection and replacement, understanding the functions of these three parts can help you judge the quality of brake pads more scientifically.
1. Friction Layer: The "Core Execution Zone" for Braking
1.1 Key Function
It directly contacts the brake disc and generates braking force through friction, serving as the "core component" for realizing vehicle deceleration.
1.2 Material Composition (4 Key Types of Components)
Binder: Mainly composed of phenolic resin, it bonds other materials into shape. It needs to withstand high temperatures above 300℃ to prevent melting and failure;
Reinforcing Fibers: Such as glass fibers and metal wires, which enhance strength like a "skeleton" to avoid breakage during braking;
Friction Modifiers: Anti-wear agents (e.g., aluminum oxide) improve braking effect, while lubricants (e.g., graphite) reduce wear, ensuring stable performance at different temperatures;
Fillers: Such as barium sulfate, which adjust density, reduce costs, and ensure uniform forming.
1.3 Core Requirements
High-temperature resistance: The temperature can reach 600℃ during emergency braking, so "thermal fade" (a drop in friction coefficient leading to brake failure) must be avoided;
Wear resistance: Under normal use of family cars, the service life of the friction layer corresponds to 30,000-80,000 kilometers. It needs to be replaced in time when worn too thin.

2. Backplate: The "Support and Protector" of the Structure
2.1 Key Function
As the "skeleton" of the brake pad, it is responsible for fixing, force transmission, and heat dissipation to ensure the stable operation of the friction layer.
2.2 Material and Characteristics
Material: Cold-rolled steel plate, which needs to be sufficiently hard (to avoid deformation under force) and corrosion-resistant (surface galvanized/electrophoretic coated to prevent rust from rainwater);
Core Functions:
Fixing the friction layer: It is tightly bonded through high-temperature pressing; separation will directly lead to brake failure;
Force transmission: Uniformly transmits the thrust of the wheel cylinder to the friction layer to ensure stable braking;
Auxiliary heat dissipation: Conducts the heat generated by the friction layer to the air, slowing down thermal fade.
3. Shock-Absorbing Layer: The "Invisible Buffer Zone" for Comfort
3.1 Key Function
Located between the friction layer and the backplate, it solves the "noise and vibration" during braking and improves driving comfort.
3.2 Material and Characteristics
Material: Rubber, damping material, with a thickness of 1-3 mm. It needs to have high elasticity (to absorb vibration) and high damping (to suppress noise);
Core Functions:
Vibration reduction: Absorbs high-frequency vibration generated by friction to prevent transmission to the cockpit;
Noise reduction: Changes the vibration frequency to reduce "squeaking" and "buzzing" sounds. A high-quality shock-absorbing layer can reduce noise by 10-20 decibels.

Summary: The "Cooperative Logic" of the Three Components
The friction layer is responsible for "braking", the backplate for "stability", and the shock-absorbing layer for "comfort"; none of them is indispensable;
Key points for selection: Check whether the friction layer material contains high-quality fibers and binders, whether the backplate has anti-rust treatment, and whether it is equipped with a shock-absorbing layer (family cars should prioritize those with a shock-absorbing layer for better noise reduction);
Daily inspection: If there is abnormal noise during braking or the braking distance becomes longer, it may be due to wear of the friction layer or deformation of the backplate, and timely maintenance is required.
Mastering these three points allows you to quickly judge the quality of brake pads and provide an extra guarantee for driving safety.






