Brake Pad Industry Knowledge Popularization: A Comprehensive Guide to Brake Pads

In a car's safety system, brake pads play a crucial role, directly affecting the vehicle's braking performance and the safety of drivers and passengers. Today, we will take you to a deeper understanding of brake pads.

I. Types of Brake Pads

1. Semi-metallic brake pads: Many cars come equipped with semi-metallic brake pads from the factory. They are made by mixing metal fibers with non-metallic materials (such as graphite and glass fiber). They perform well in temperature control and heat dissipation, with relatively low costs and affordable prices, so they are widely used. However, their friction coefficient is generally 0.38, which is not relatively high, and their service life is limited. When braking in low-temperature environments, noise may occur. Some semi-metallic brake pads with high friction coefficients have more obvious noise problems, and noise is more common when such brake pads are used in Japanese cars.

2. Low-metallic brake pads: They are similar in appearance to semi-metallic brake pads but have a lower metal content. They effectively solve the problem of brake drum wear and produce less noise during braking. However, their service life is slightly shorter than that of semi-metallic ones.

3. Non-metallic brake pads: They usually contain no metal components and are mostly made of fiber materials such as aramid and glass fiber. Due to differences in formulas and processes among different manufacturers, product performance varies. Their price is slightly higher than that of semi-metallic brake pads, belonging to mid-range products, and it is difficult for consumers to distinguish them from semi-metallic brake pads when choosing.

4. Ceramic brake pads: Made by mixing ceramic fibers with other fibers and then curing with organic binders, they are a relatively high-end type of brake pads nowadays. They have the advantages of high hardness, good wear resistance, less dust, no corrosion to wheel hubs, no noise, and environmental protection. Their thermal decay performance is better than that of semi-metallic ones, and they are very popular in European, American, and Japanese markets. However, ceramic brake pads produced by different manufacturers have large price differences due to different raw materials. Truly high-quality ceramic brake pads containing aramid fibers have more advantages in service life and performance, and of course, their prices are relatively high.

Semi Metallic Disc Brake Pads

5. Carbon fiber brake pads: They are widely used in the aerospace field and have many excellent properties, such as strong thermal conductivity, excellent high-temperature resistance, not easy to fail during long-time braking, little wear on brake discs, long service life, high power absorption per unit area, and light specific gravity. However, their high price limits their application range, and they are mostly used in aircraft, foreign high-end sports cars, racing cars, etc.

II. Performance Indicators of Brake Pads

1. Braking performance: It refers to the braking capacity of the brake pads under normal braking conditions (with low braking temperature), that is, the friction coefficient. The friction coefficient of brake pads is not the higher the better; instead, a balance in comprehensive performance is needed to meet the design requirements of the whole vehicle. Only when the friction coefficient is within a reasonable range can the vehicle stop stably and timely during braking.

2. Fade performance: When the vehicle brakes continuously on road conditions such as downhill mountain roads, the temperature of the brake will rise rapidly, and the brake disc may reach a high temperature of 400-500℃ or even above 700℃. At this time, the braking capacity of the brake pads will deteriorate, and the braking distance will increase. This phenomenon is called "fade". Naturally, we hope the fade rate of brake pads is as small as possible. High-quality brake pads have a very small fade rate, and even do not fade in some cases; while some shoddy products fade seriously at high temperatures, almost losing their braking capacity.

3. Recovery performance: After the brake pads fade at high temperatures, whether they can quickly recover their original braking performance when the temperature drops is also an important indicator to measure the quality of brake pads. Brake pads with good recovery performance can quickly restore their braking capacity after the temperature drops, ensuring driving safety.

4. Wear: It includes the wear of the brake pads themselves and the impact on the wear of the brake disc. The braking effect is closely related to the formula and process of friction materials. For example, carbon fiber brake pads can be used for hundreds of thousands of kilometers without replacement. High-quality brake pads will form a protective film on the friction surface of the brake disc during braking, thereby reducing the wear of the brake disc; while inferior brake pads contain a lot of hard spots and impurities, which will scratch many grooves on the surface of the brake disc, accelerating the wear of brake pads and brake discs.

5. Noise: In today's era of paying attention to environmental protection and driving experience, braking noise is also an important indicator. In fact, there are many factors causing braking noise, and brake pads are one of them. It is generally believed that brake pads with too high hardness are prone to produce noise, which not only affects the driving experience but also may reflect quality problems of the brake pads.

6. Other performance indicators: In addition to the above indicators, there are also performance indicators such as shear strength, hardness, compression rate, thermal expansion, water absorption, and adhesion, which affect the performance and use effect of brake pads from different aspects.

III. Replacement Cycle of Brake Pads

The replacement cycle of brake pads is not fixed and is affected by many factors. Generally speaking, the replacement cycle of front brake pads is 30,000-50,000 kilometers, and the rear brake pads usually have a longer service life than the front ones, needing replacement about every 60,000-80,000 kilometers. This is because during braking, the vehicle's center of gravity moves forward, and the front wheels bear more than 70% of the braking force, so the front brake pads wear faster, while the rear brake pads are mainly responsible for stabilizing the vehicle body, but their wear should not be ignored either. In addition, driving habits and road conditions have a great impact on the wear degree of brake pads. Frequent sudden braking, frequent driving in congested road sections, or long-time driving on mountain roads will accelerate the wear of brake pads and shorten their replacement cycle; while under the conditions of stable driving and good road conditions, the service life of brake pads will be relatively prolonged.

Semi Metallic Disc Brake Pads

IV. How to Choose High-quality Brake Pads

1. Look at the brand and reputation: Choose brake pads of well-known brands, which usually have accumulated a good reputation in the market, and their product quality and after-sales service are more guaranteed. You can learn about the evaluations and usage of different brands of brake pads through online searches, consulting other car owners or auto maintenance personnel.

2. Check the product appearance: High-quality brake pads should have a smooth and flat surface, without obvious air holes, impurities, or scratches. The edges are neat, without burrs or deformation. At the same time, pay attention to the packaging of the brake pads. The packaging of regular products is usually clearly printed, with complete brand logos, product models, manufacturers, and other information.

3. Refer to certifications and standards: Ensure that the selected brake pads meet relevant quality certifications and industry standards, such as China's 3C certification. These certifications are a recognition of product quality, and products that meet the standards are more reliable in performance and safety.

4. Consider vehicle type and usage needs: Different types of vehicles have different requirements for brake pads. For example, high-performance sports cars need brake pads with high-temperature resistance and strong braking performance; while ordinary family cars pay more attention to cost-effectiveness and durability. Choose the appropriate type of brake pads according to your vehicle type and daily usage scenarios.

As Shandong Huaruifeng Machinery Co., Ltd., we have been focusing on the R&D, production, and sales of brake pads, with advanced production technology and a strict quality control system, committed to providing customers with high-quality and high-performance brake pad products. Our products cover a variety of types, including carbon fiber-based friction plates, semi-metallic brake pads, low-metallic brake pads, ceramic brake pads, environmental protection mineral fiber disc brake pads, etc., which can meet the needs of different customers. Whether you are an automobile manufacturer, an auto maintenance shop, or an ordinary car owner, choosing Huaruifeng's brake pads means choosing safety, reliability, and peace of mind. It is hoped that the above introduction can help you better understand the knowledge of the brake pad industry and protect your driving safety.

Heavy Duty Truck Brake Pads

You Might Also Like

Send Inquiry